FQEWOGPV"
PQ0"
TGX0PQ" RCIG"
UVCPFCTF"
PCOG"
"
"
" 913;"
Table-8 Register Selection
M68 i80
RS
R/W /RD /WR
Operation
0 0 1 0 IR write as an internal operation (display clear, ect.)
0 1 0 1 Read busy flag (DB7) and address counter (DB0 to DB6)
1 0 1 0 DR write as an internal operation (DR to DD-RAM or CG-RAM)
1 1 0 1 DR read as an internal operation (DD-RAM or CG-RAM to DR)
5.1.1 Busy Flag (BF)
When the busy flag is 1, the controller is in the internal operation mode, and the next
instruction will not be accepted. When RS =0 and R/W=1 (Table-8), the busy flag is
output to DB7.
The next instruction must be written after ensuring that the busy flag is 0.
5.1.2 Address Counter (ACC)
The address counter (ACC) assigns addresses to both DD-RAM and CG-RAM. When an address of
an instruction is written into the IR, the address information is sent from the IR to the ACC. Selection
of either DD-RAM or CG-RAM is also determined concurrently by the instruction. After writing into
(reading from) DD-RAM or CG-RAM, the ACC is automatically incremented by 1 (decremented by
1). The ACC contents are then output to Db0 to Db6 when RS =0 and R/W=1 (See Table-8)."
5.1.3 Display Data RAM (DD-RAM)
Display data RAM (DD-RAM) stores display data represented in 8-bit character codes.
The area in DD-RAM that is not used for display can be used as general data RAM.
See Table-9 for the relationships between DD-RAM addresses and positions on the VFD
Table-9 Relation between Digit Position and DD-RAM data
Left End 2
nd
Column 3
rd
column - - - - - - - - - - - 15
th
Column Right End
1st
Row 00H 01H 02H - - - - - - - - -- - - 0EH 13H
5.1.4 Character Generator ROM (CG-ROM)
The character generator ROM (CG-ROM) generates character patterns of 5x7 dots from 8-bit
character codes (table-10). It can generate 240 kinds of 5x7 dots character patterns.
The character fonts are shown on the following page. The character codes 00H to13H are allocated
to the CG-RAM."
5.1.5 Character Generator RAM (CG-RAM)
In the character generator RAM (CG-RAM), the user can
rewrite character patterns by program.
For 5
々7 dots and cursor, eight character patterns can be
written. Write into DD-RAM the character codes at the
addresses shown as the left column of Table-10 to show
the character patterns stored in CG-RAM.
See Table-11 for the relationship between CG-RAM
addresses and data and display patterns and refer to
Fig-10 for dot assignment of VFD.
Areas that are not used for display can be used as general data RAM
"
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
26 27 28 29 30
31 32 33 34 35
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
M0121LB-222LHAR2-I1
MODULE VF CHAR 1X21 14.5MM
M0216MD-162MDBR2-J
MODULE VF CHAR 2X16 9.22MM
M0216SD-162SDAR1
MODULE VF CHAR 2X16 4.34MM
M0216SD-162SDAR2-1
MODULE VF CHAR 2X16 5.34MM
M0216SD-162SDAR8
MODULE VF CHAR 2X16 5.34MM
M0220MD-202LDAR2
MODULE VF CHAR 2X20 10.5MM
M0220MD-202MDAR1-1
MODULE VF CHAR 2X20 8.95MM
M0220MD-202MDAR1-3
MODULE VF CHAR 2X20 8.95MM
相关代理商/技术参数
M0121LB-222LHAR2-I1
功能描述:MODULE VF CHAR 1X21 14.5MM RoHS:是 类别:光电元件 >> 显示器模块 - 真空荧光(VFD) 系列:- 产品变化通告:MO VPT Module Change 16/Aug/2010
2x20 Screen Board Change 10/Nov/2009 标准包装:1 系列:VK202-25 外形L x W x H:116.00mm x 37.00mm x 29.48mm 可视范围:89.75mm L x 11.50mm W 显示格式:20 x 2 显示器类型:字符 格式:5 x 7 点 电源电压:9 V ~ 35 V 字符尺寸:4.70mm H x 2.40mm W 点数:- 接口:串行 工作温度:-20°C ~ 70°C 相关产品:VFD-GREEN-202-ND - LCD ACCY VFD FILTER 20X2 GREENVFD-RED-202-ND - LCD ACCY VFD FILTER 20X2 REDVFD-GREY-202-ND - LCD ACCY VFD FILTER 20X2 GRAYVFD-BLUE-202-ND - LCD ACCY VFD FILTER 20X2 BLUE
M012437-00A
制造商:Teac 功能描述:1" HIGH BLACK BEZEL - Bulk
M012437-00B
制造商:Teac 功能描述:1" HIGH BLACK BEZEL - Bulk
M012450-00A
制造商:Teac 功能描述:SHUTTER;BLACK 制造商:Teac 功能描述:FLAP - Bulk
M0128-SS-20
制造商:RAF Electronic Hardware 功能描述:
M0132-SS-20
制造商:RAF Electronic Hardware 功能描述:
M0133-SS-0
制造商:RAF Electronic Hardware 功能描述:
M0145-SS
制造商:RAF Electronic Hardware 功能描述: